Topic: “White Mold in Basement“, the White mold is what is known as the earliest and youngest form of molds. Almost all molds are originally white in color (or very light) until they mature to a darker color.

White molds are cotton like and are very susceptible to be growing in the basement. This is because most devices such as washers, dryers, and boilers are found in the basement.

These domestic appliances release water vapors that make the conditions for mold growth more than just ideal.

White mold is, therefore, a very common sight in the basement of your house.

Identifying White Mold in Basement

White mold cannot be easily identified because it has a white cotton-like texture, but one may confuse it with efflorescence.

Efflorescence has exactly the same white cotton-like texture and one cannot differentiate by simply looking at it.

Efflorescence grows when moisture and humidity are present and so does mold. If you have a cotton-like growth in your home, it means moisture is there.

Now the growth may or may not be mold but it can mean that mold is likely to form.

Therefore, seeing the growth you should be concerned about it and should have it removed and take further measures to control humidity.

How to Differentiate Mold vs Efflorescence?

Mold can very conveniently be differentiated from efflorescence by a simple experiment.

Scrap off some of the white cotton-like structure and carefully put it in a glass of water. While doing so, make sure to wear gloves to avoid any consequences.

If the cotton-like structure dissolves in the glass of water then it most certainly means efflorescence but if it does not, you have mold growing in your basement.

If mold has been identified, you should contact experts immediately and get the moisture and humidity under control.

How to Remove Mold in Basement

As described earlier, white mold appears as a cotton-like texture that grows in places with lots of moisture, humidity and organic matter to feed on.

Basements are enclosed places with poor ventilation, little sunlight and accumulated moisture.

Basements are therefore most susceptible to white molds. Here are some of the easiest ways to remove white mold from basements.

Use Vinegar

Vinegar is a convenient and powerful agent against molds. You can choose to dilute it in water if there is a lot of molds to be removed, or you can directly use it.

It is more effective when used undiluted. You can use an absorbent fabric like a towel or a sponge to soak it in vinegar and then use it to rub off the vinegar.

Furthermore, let the vinegar sit on the surface if you are pouring it to kill the mold effectively.


Use Tea Tree Oil

Tea Tree oil is a very useful natural agent against fungus and molds. However, not all tea tree oils are effective against molds, when getting a bottle to be sure to check it can be used or not.

You can mix the oil in a 50% ratio with water and spray it on the mold. It is fairly easier to use because spraying the oil is easier than wiping.

After spraying, you may want to scrub until the mold has completely disappeared.


Use Hydrogen Peroxide

Hydrogen peroxide can be brought easily for less, from a nearby drugstore or a grocery store and it is a non-toxic agent against molds.

Hydrogen peroxide is even safe to use on fabrics and can, therefore, be used not only on non-porous surfaces but literally anywhere to remove mold.

Hydrogen peroxide needs to be mixed with water before use. Create a 50% ratio mixture of water and the solution.

Let the mixture sit on the mold for at least 10 minutes before wiping it off.


Use Borax

Borax is a slightly toxic material, but it is still better than most non-toxic materials because it is not harsh to the surface where it is applied to.

You can use borax by mixing one cup of borax with around a gallon of water. Use this solution and rub the mold off of any surface.

A stiff brush or a scrub may be used to mold that does not come off easily. The thing about borax is that it also deodorizes the musty and pungent smell of molds.


Use Bleach

Bleach is also a very powerful agent against mold and it kills all mold from a surface, but it has a downside that it can only be used on non-porous surfaces.

Surfaces such as ceramics, tiles, and glass can be cleaned for mold quite easily using bleach. Therefore, it may not be as much help in the basement, but the removal simply depends on where the mold has affected your home.

And if there is mold on a non-porous surface in your basement (on the window for example), you can conveniently get rid of it with bleach.

More Related: White Mold

What is White Mold

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *